“Badger” – The Modern African Bushfighter
South Africa has a long tradition of designing highly mobile wheeled armored vehicles such as the Casspir, Ratel, Rhino and Rooikat. The terrain and climate in the region, as well as the strategic defence needs of South Africa, require a highly mobile Infantry Fighting Vehicle (ICV) able to travel large distances and fulfil a wide variety of roles. The Badger ICV adopts its name from its predecessor, the “Ratel”. This animal, despite its small size, is a fierce creature which can sustain a large amount of physical damage as well as inflict it with its long claws. The Badger is therefore well named as its modern armament, enhanced protection, and vastly improved mobility over its predecessor the Ratel make it a formidable opponent. It is designed and produced at a time when South Africa, as a fully-fledged democracy, is undertaking more peacekeeping responsibilities on the African continent. While its neighbours still rely heavily on Soviet-designed equipment, South Africa chose to continue its tradition of self-reliance by making use of more than 70% local content for the Badger.
Section variant – With permission Andre Smith
With the venerable Ratel ICV passing 40 years of service in 2016, the need for a more modern ICV is seen as paramount. Having formed the backbone of South African mechanised battalions for 13 years during the South African Border War (1968-1989) and continuing to serve until the present day, the Ratel is starting to show its age. Shortages of dedicated parts make logistics very difficult, resulting in cannibalization of surplus vehicles.
The need for a modern ICV was already laid down in 1995 with the writing up of the required operational capability by the South African National Defence Force (SANDF). This was subsequently approved and followed by the staff target and staff requirement, which consists of a functional user requirement and logistical user requirement. In essence, a wish list of capabilities. The Armaments Corporation of South Africa SOC Ltd (ARMSCOR) was tasked with translating these requirements into technical engineering terms. During the following three years, the SANDF decided to prioritise the modernisation of its Navy (4 Valour class frigates and 3 x 209 Class diesel submarines) and Air Force (26 Gripen C/D and 24 Hawk 120). Subsequently, the Army had to make do with what it had for at least another ten years.
By early 2005, eight South African and four international defence contractors were asked to submit proposals and budgets for a new ICV under the code name “Project Hoefyster (Horseshoe)”. Only one bid was received from a consortium which consisted of the Finnish Patria and its part-owner, EADS (European Aeronautic, Defence and Space Company), Denel, OMC (Olifant Manufacturing Company) and Land Mobility Technologies (LMT). The proposed vehicle was the Patria’s 8×8 Armored Modular Vehicle (AMV), which would be redesigned for southern African battle space by LMT. OMC would manufacture the hulls and Denel the turrets and main armaments. The approved budget for the project was around US$780 million.
In May 2007, Denel Land Systems (DLS) was contracted to do the internal fits and supply one prototype of each of the envisaged five variants using the Patria hulls that arrived in South Africa. Each was evaluated and accepted by the SANDF which led to 22 pre-production vehicles being built by Patria in Finland. During late 2010, the SANDF awarded DLS a further contract to develop Badger ICV products. The then Minister of Defence approved “Project Hoefyster” in 2013 after the initial development phase was complete. The original order called for 264 vehicles but was later reduced to 238. The final number of vehicles to be delivered now rests on 244 ICV`s after increasing advance payments to the industry. The final 244 ICV`s will consist of 97 Section, 14 Fire support, 41 Mortar, 70 Command, 14 Missile, and 8 Ambulance vehicles. According to Denel, the first battalion of 88 vehicles will be completed in 2019. The entire production order is set to be complete by 2022.
The vehicles will be primarily used by 1 South African Infantry Battalion (SAI) based in Bloemfontein and 8 SAI situated in Upington. Some variants will be allocated for utilisation by Brigade Headquarters while a small number will be assigned to Signal and Artillery Formations. The Badger combines a good mix of firepower, protection and mobility and overshadows all current regional rivals. It is highly maneuverable for its size and continues the SANDF`s tradition of mobile warfare based on an indirect approach and low force density. The principal tasks of the Badger are variant specific and include troop transport, fire support, anti-armor, command and control, and medical transport.
The design, development and production of the Badger was undertaken due to the need for a more modern ICV to replace the Ratel presently in service with the SANDF. The Badger is characterized by eight big wheels, mobility, bush breaking ability, and versatility as a weapons platform which will be well adapted for its role as a modern ICV in the Southern African battle space.
The African battle space favors a wheeled configuration, which makes the Badger the perfect candidate for its role as an ICV. The Badger makes use of an automatic ZF gearbox with seven forward and one reverse gears with the option for the driver to also change gears manually if required. The Badger can ford 1.2 m of water without preparation and has 400 mm of ground clearance. It is powered by a Scania fuel injected diesel engine which produces 543 hp @ 2100 rpm and provides a 20 hp/t ratio. This horsepower to weight ratio allows the Badger to accelerate from 0-60 km/h (0-37.2 mph) in under 20 seconds and 60-100 km/h (37-62 mph) in under 40 seconds, and achieve a top speed of 104 km/h (64 mph). The Badger retains 70% mobility with the loss of one wheel and 30% with the loss of two wheels. The wheels feature a central tire inflation system. It can cross a 2 m trench at a 3km/h crawl, and can climb a gradient of 60%, and has a side slope rating of 30%. The suspension system makes use of hydro-pneumatic struts which allows for true independent wheel movement over rough terrain, thereby dramatically increasing the stability of the vehicle and ensuring a smoother ride for the occupants (see Mobility track demonstration, AAD 2016 video below at 0.37 sec). All wheels are equipped with ABS brakes. The auxiliary power unit (APU) allows all onboard systems to remain powered even if the engine is switched off.
Endurance and logistics
The fuel capacity of the Badger is 450 litres (118.8 US gallons) which allows it to travel 1000 km (621 mi) on the road and 750 km (311 mi) off-road. 190 litres (50.2 US gallons) are stored in the left fuel tank and 230 litres (60.7 US gallons) in the right one, while another 27 litres (7.1 US gallons) are located in the transfer tank. The Badger is fitted with a mix of up to 2 x VHF, 3 x HF tactical radios which allow for reliable inter-crew and multivehicle communication. This command and control system enhances the ICV`s force multiplier effect on the battlefield. The Badger features four built-in drinking water tanks with a total capacity of 130 litres (34.3 US gallons).
Most Badgers carry a standard complement of four crew members, consisting of the troop commander, vehicle commander, gunner, and driver. The vehicle commander’s station is located on the left side and the gunner’s station on the right of the turret. The troop commander is positioned behind the driver who is seated in the forward left side of the hull. Each station in the turret has six vision blocks which provide a 270-degree field of view. The vehicle commander has at his disposal a day video sight which offers a stabilised 360-degree capability. Both the vehicle commander and the gunner have a 360-degree situational awareness through episcopes and multi-function flat panel video displays. Additionally, the vehicle commander has the ability, via the video sight, to override the gunner’s control and slave the main gun onto a target. The gunner’s station is fitted with an x8 day and night, thermal sight periscope as well as an auxiliary gunner sight with direct view optics with aiming reticules. Entry and exit for the former and latter are through the gunner’s and vehicle commander’s cupola. In an emergency, the gunner and vehicle commander can escape through the rear of the vehicle. The driver’s station is located on the front left of the hull and is accessible through the fighting compartment or a single-piece hatch above the driver’s station. The driver’s station is adjustable and features three periscopes for enhanced visibility and situational awareness. The central periscope can be substituted with a passive night driving periscope allowing full day/night capability. The driver can make use of compressed air to clean his periscopes while buttoned up, a feature particularly useful in the dusty climates in which the Badger will operate. The driver makes use of power-assisted steering wheel to drive while acceleration and braking are controlled with foot pedals.
The rear compartment has seating space for passengers the number of which is variant specific. The Badgers crew and passenger compartment feature an air conditioning unit, which helps reduce crew and passenger fatigue. The passenger seats face inward and are fitted to a frame which is attached to the hull in such a way that should a mine detonate under a wheel or hull the minimum amount of mine blast energy reaches the passenger seats, thereby reducing the possibility of spinal injury. Additionally, each seat is fitted with a footrest which allows the passenger across from the seat to rest their feet off the floor, also to reduce the possibility of injury should a mine be detonated. The Badger is fitted with several hull encased, all-round camera video system for enhanced situational awareness. The troop compartment is equipped with several monitors displaying the camera views and a dedicated section leader monitor for planning and presentation purposes. The hydraulically operated rear door was designed in South Africa and doubles as a weapons and equipment rack which can hold entrenching tools, light machine gun (LMG), 40mm six round grenade launcher, RPG-7, 60mm patrol mortar and ammunition for the aforementioned weapons. The advantage of such an arrangement is that it frees up the troop compartment from unnecessary clutter and provides quick access to troops disembarking from the rear. Entry and exit from the rear door are made easier by a step which deploys mechanically as the door opens and retracts when the rear door closes.
The Badger makes use of the Light Combat Turret (LCT) which forms part of a Modular Infantry Combat Turret (MICT) family developed by Denel as part of the New Generation Infantry Combat Vehicle (NGICV) programme for the SANDF. The turret family is built around the Fighting Compartment Module (FMC) principle which allows various weapons and sighting systems to be integrated with ease. Such a design vastly reduces logistical requirements, operational costs, training time and ensures maximum commonality and re-use of components within the modules. Both the Section variant and the Fire Support variant make use of the LCT-30 turret which can make a full 360-degree rotation in 13 seconds. The Mortar variant is equipped with the LCT-60 while the command variant is equipped with the LCT-12.7, and the Missile variant uses the LCT-Missile turret.
Modular Infantry Combat Turret Variants – Screengrab from AMICT brochure (see bibliography)
The Section variant is armed with a Denel 30 mm dual feed linkless Camgun (EMAK 30) which can engage targets effectively at 4000 m. The Camgun features a double baffle muzzle-brake and has a single recoil mechanism. Rapid fire consists of a 3-round burst mode which provides 60 rounds per minute. Empty cartridges are ejected on the left side of the turret. The section variant carries 400 x 30 mm cannon rounds. The rounds carried consist of Armor-Piercing-Fin-Stabilised-Discarding-Sabot (APFSDS) for use against armored targets and Semi-Armor-Piercing-High-Explosive-Incendiary (SAPHEI) for use against soft targets. Literature searches reveal that modern 30 mm cannon rounds such as the APFSDS have a muzzle velocity of 1430 m/s and can penetrate < 100 mm of Rolled Homogeneous Armor (RHA) at 1000 m. This is significant considering that Infantry Fighting Vehicles (IFV) such as the BMP-2 and BMP-3 only have 33 mm and 35 mm of frontal armor respectively. Furthermore, this means that the Badger Section variant is capable of knocking out T-55, T-62 and T-72 Main Battle Tanks (MBT) found in the region from the sides and rear from range. It should, however, be stressed that the Section variant is not supposed to engage MBT`s directly. The SAPHEI has a muzzle velocity of 1100 m/s and can penetrate 30 mm of steel plate at 30 degrees at 200 m.
All but the Ambulance variant is armed with a co-axial 7.62 mm belt-fed machine gun with a total of 4000 rounds (20 belts of 200 rounds each). The vehicle commander has at his disposal a stabilised panoramic sight and a primary stabilised main sight which can track targets automatically. All variants have a day/night sight capability as standard with some variation of the fire-control system which is variant specific.
Fire Control System
The Badger is equipped with the FDS digital fire control system which receives information from a laser rangefinder and accurately places rounds on target with the main gun. The laser rangefinder is accurate to within 5 m at 10 km. The variations are automatically calculated and compensated according to the ammunition selected by the gunner. The fire control system allows the gunner to select a target in less than two seconds. The fire solution is given allowing the gunner to fire on target which adjusts the main guns auto lay aim. The commander can override the gunner’s aim with the flip of a switch to put the main cannon on target. This effectively provides the Badger with hunter-killer capability. The digital fire control system allows hits on a moving target while the Badger is on the move itself by adjusting the main gun’s aim after taking into account the distance to the target, the relative speeds and relative direction, thereby maximising first round hit probability. The single shot hit probability while static at a 2.4 m x 2.4 m target at 2000 m is greater than 65%.
The Badger is based on the Finnish Patria Armored Modular Vehicle (AMV). Unlike its European counterpart, the Badger has numerous modifications such as dedicated bush protection to enhance its durability for use in the African bush. The Badger features a dual hull design to enhance survivability against kinetic and high explosive anti-tank (HEAT) projectiles. The total thickness of the outer/inner hull and add-on armor package and composition thereof are classified. The outer hull (which can be removed) functions as a first line defence against light and medium arms. This is followed by an empty space of classified width which can act either as spaced armor or can be fitted with an add-on armor package developed by Armscor`s Armor Technology Institute. The add-on armor over the frontal arc is left in place during peacetime whereas the left and right sides add-on armor is removed. Lastly is the inner hull which serves as the last line of defence. The inner hull is fitted with an anti-spall lining to reduce crew vulnerability to fragments in case of penetration. It was reported from Afghanistan, where the Badger’s cousin the Patria was deployed, that two such vehicles equipped with add-on armor package, survived direct hits from RPG-7s which did not penetrate the inner hull. It is unclear what types the RPG rounds were. The Badger is protected against 30 mm APFSDS rounds over the frontal arch and 23 mm Armor Piercing (AP) rounds around the remaining hull. The roof is rated against heavy artillery blast and fragmentation.
Due to the prevalence of anti-tank (AT) and anti-personnel mines in Sub-Saharan Africa, the Badger features a flat bottom mine protected hull (not found in the Patria) which absorbs the blast and shock produced by a mine detonation. The technology was developed by Land Mobility Technology (LMT) and offers protection against the equivalent of a 6 kg mine anywhere under the hull.
The Badger features two automatic fire suppression systems, one for the engine and the other for the crew/troop compartment. The system can also be engaged manually. The Badger is fully Nuclear, Biological and Chemical (NBC) capable as it comes standard with an overpressure system. Two banks of two smoke grenade launchers are located on the roof of the turret, behind the commander and gunner’s station to protect them from damage when “bundu bashing” (driving through dense vegetation). The hull headlamps are encased in the hull, and an armored screen was added to protect them from damage while “bundu bashing”. A recent addition to all the Badger variants is a guide rail/cage on the turret, the main purpose of which is to guide branches over the commander’s sight to avoid damage to it.
Section variant with additional bush protection over the front lights – With permission Andre Smith
There are six variants of the Badger, of which five are armed, namely the Section variant (30 mm), Fire support variant (30 mm), Mortar variant (60 mm), Command variant (12.7 mm) and Missile variant (Ingwe). The Ambulance variant is not armed.
The Section variant is armed with a Denel 30 mm dual feed linkless Cam Gun (EMAK 30) which can engage targets up to 4000 m when firing one round at a time. Rapid fire consists of 3-round bursts. The Section variant carries 400, 30 x 173mm rounds. The rear compartment of the Section variant has seating space for four passengers on the left and three passengers on the right.
Section variant at the African Aerospace and Defence 2016 – notice the guardrail on the left side of the turret. (Photo: Dewald Venter)
Fire support variant
The Fire support variant carries the same main armament as the Section variant but has additional main armament ammunition which is kept in storage racks on the right-hand side of the passenger compartment. Seating in the passenger compartment is limited to two for use by a dedicated two man anti-tank team.
The primary purpose of the Mortar variant is to supply indirect fire support to attacking forces. It is equipped with a 60 mm DLS breech loading, water-cooled mortar which can engage targets directly at 1500 m in line of sight or 6200 m indirectly. The mortar variant carries 256 x 60 mm bombs and has a firing rate of 6 bombs per minute (one every 10 seconds) and accuracy of 2.4 m x 2.4 m at 1500 m. It has a 40% better lethality and effectiveness than the old 81mm mortar bombs. The variant has four crew members, namely the vehicle commander, gunner, driver, and technician. The bombs are kept in bin racks on either side of the rear compartment with the technician’s seat on the left.
Mortar variant – With permission Andre Smith
The Command variant is armed with a primary 12.7 mm machine gun which allows more room for Command and Control (C&C) equipment and personnel. The command variant carries 1200 x 12.7 mm rounds. This variant has a standard crew of three (driver, vehicle commander, and gunner) and two to three communication staff in the rear.
The Missile variant is armed with the Denel Dynamics ‘Ingwe’ (Leopard) laser-guided, jam-resistant, beam-riding missile which has an effective engagement range of over 5000 m. The Ingwe has a tandem warhead that can defeat Explosive Reactive Armor (ERA) and can penetrate up to 1000 mm of RHA. On either side of the turret is a missile launcher system, which accommodates two missiles. When not in use, the missile launcher reverts to a 45-degree nose down sloped position behind a protective plate to protect the launcher from small arms fire and possible damage when “bundu bashing”. When a target is to be engaged, the missile launchers nose rises 45 degrees up to a level position, from where the missile can be fired. A total of 12 missiles are carried in the rear compartment racks on either side of the hull. The Missile variant carries a driver, vehicle commander, gunner and loader. The missile launchers are rearmed from within the vehicle via guide rails. Each Ingwe weighs 34 kg and requires two people to load.
Missile Variant – With permission Andre Smith
The Ambulance variant has a crew complement of 3 which consists of a driver two medical personnel. The Ambulance variant has no turret and instead has a higher roof than the other variants. It features an effective patient handling system allowing for the minimum effort of moving patients using rails and winch system. The rear compartment is better lit than the other variants. Three patients lying down can be carried at a time or two patients lying down and four seated.
Ambulance variant – With permission Andre Smith
The Badger is the first new ICV in the SANDF inventory since the Ratel was introduced in 1975. The Badger is one of the best-protected vehicles of its class in the world. This, combined with its mobility and firepower, makes for a formidable adversary. As such, the Badger is a worthy successor and vast improvement over its predecessor, the Ratel. Although the cost of the Badger might seem high to most, it is very affordable when compared to other modern wheeled ICV`s such as the MOWAG Piranha, Boxer and French IFV’s.
Badger Section variant specifications
|Dimensions (hull) (l-w-h):||8.01 m (26.3 ft.) – 3.44 m (11.3ft.) – 2.83 m (9.28 ft.)|
|Total weight, battle ready||28 Tons|
|Crew||4 crew + 7 troops|
|Propulsion||Scania fuel injected diesel engine which produces 543 hp @ 2100 rpm. (21.7 hp/t).|
|Suspension||Hydro pneumatic struts|
|Top speed road / off-road||104 km/h (64 mph) / 60 km/h (37 mph)|
|Range road / off-road / sand||1000 km (621 mi) / 750 km (466 mi)|
|Main armament (see notes) Secondary armament||Denel 30 mm linkless Cam Gun (EMAK 30)
1 × 7.62mm co-axial Browning MG
|Armor||Exact armor thickness classified.
The Bader is protected against 30mm APFSDS rounds over the frontal arch and 23mm AP rounds around the remaining hull. The roof is rated against heavy artillery blast and fragmentation.
The hull was tested and proven against the 6 kg anti-tank mine.
|Total Production (Hulls)||244|
Mobility track demonstration, AAD 2016
AAD 2016: Denel Badger Infantry Fighting Vehicle (IFV)
Reynolds, J. 2012. Denel Land Systems Shows GI-30: 30mm Camgun. African Armed Forces Journal, 2:11.
DEFENCEWEB. 2017. First locally produced pre-production Badger expected later this year. Date of access: 5 May. 2018. (LINK)
DENEL. 2018. ADVANCED MODULAR INFANTRY COMBAT TURRET. Date of access: 22 Apr. 2018. (PDF)
Camp, S. & Heitman, H.R. 2014. Surviving the ride: A pictorial history of South African manufactured mine protected vehicles. Pinetown, South Africa: 30° South Publishers
GLOBAL SECURITY.ORG. 2016. Hoefyster (Horseshoe) / Badger. Date of access: 4 May. 2018. (LINK)
MILITARY-TODAY. 2014. Badger Infantry Fighting Vehicle. Date of access: 17 Apr. 2017. (LINK)
Martin, G. 2016. Defence Equipment for South Africa. Military Technology, 40(9): 64-69.
NAMMO. 2018. Nammo ammunition handbook. 5th Ed. Date of access: 15 Apr. 2018. (PDF)
Smit, A. 2018. Interview with Badger, project manager Denel. Date 9 Feb. 2018.
VEG Magazine. 2005. Die vervaning van `n legende: Projek Hoefyster. Issue 8. Victor Logistics.
Help support tank’s encyclopedia with the official Denel’s Badger poster !