Kingdom of Italy (1939)
Self-Propelled Gun – Wooden Mockup Built
Italy had a shortage of armor, guns and of just about everything they needed to wage a modern war against a modern, well equipped, and well-disciplined opponent. As World War Two beckoned in Europe, the Italians, under the leadership of Benito Mussolini, were far behind in their modernisations with the majority of funding going to the Navy rather than the Army or Air Force. The result was that the Army, despite having requirements for tanks and support guns, was not getting what it needed, namely armor in quantity.
One particular shortfall in planning was the lack of a gun of an adequate calibre to fire high explosive and smoke shells to support the infantry during their attacks.
The small CV3 series of tanks could provide machine gun fire support but even the tanks which were available in 1939 with a proper cannon, such as the FIAT 3000, were horribly out of date, slow, and poorly protected, and with just a 47mm gun which lacked the firepower needed to smash an enemy defensive structure. What was needed was a larger caliber gun.
Wooden mockup of the Semovente M6. Source: Pignato
Ansaldo’s Venture
The M6 (later L6) was a private venture by Ansaldo and FIAT which built forth on the success of the CV3 (L3) light tank. A working prototype of the vehicle was ready by 1936 albeit with a small cannon instead of the later 20mm commonly associated with it. The CV3 had been a successful design, small, rugged and adaptable, it was ideally suited to many of the needs of the military but it lacked a turret mounted gun to function effectively as a tank. The M6 was a logical step up, with improved suspension and a 360-degree arc of fire, it was superior in every way to the CV3 while still being transportable easily by truck due to its small size. The development of the M6’s improved suspension allowed it to take more weight and be better off road than the CV3 series of vehicles which made it an ideal platform for a larger gun.
Mockup of the M6 medium tank with the 47mm L/32 cannon mounted behind a gun shield on top. Source: Ceva and Curami
Selection of a Cannon
If you need to fire a high explosive shell with enough explosive to make a difference, then the 47mm gun in widespread use was simply not sufficient. The CV3 mounting a 47mm gun, for this reason, was clearly not sufficient for the infantry support role and was abandoned. The next common gun, a step up, would be 65mm. Several years before-hand, the attempt to put a 65mm gun on a small vehicle – work done by the firm of Moto-Guzzi, had also failed. The 65mm gun had been used on the enormous FIAT 2000 but that was a generation earlier and redundant, and to add to the issue, the 65mm L/17 was already effectively obsolete. It had been relegated to infantry use in the 1920’s and replaced in the mountain gun role by a 70mm gun.
It is important to note that the 47mm gun option was not abandoned for the M6 (L6) hull. At the same time as this 75mm plan was developed, a scheme was produced with the 47mm L/32 cannon mounted on top of the casemate of an L6 hull in place of the turret. Although that idea was abandoned, that design morphed into the Semovente L6/40 with the 47mm gun mounted in the front of the vehicle instead.
By 1935, the venerable 65mm had been replaced in the infantry support role by the 47mm so it was a poor choice for any future support gun, or ‘Semovente’ as it is known in Italy. The obvious choice, therefore, was a 75mm calibre. Italy already had a huge stockpile of 75mm field guns and on the 26th October 1939 General Pariani (Chief of the General Staff) listed a series of decisions on tank development programs. The M6 featured heavily within those plans including a study to modify an M6 hull to transform it into a carrier for a 75 mm gun. He noted that it must also have an anti-aircraft machine gun fitted. The choice of the M6 for this project was logical if for no other reason than that there was nothing else available. At this time, the only medium-sized vehicle in production (just) was the M11/39. Those hulls were urgently needed for the Medium tank program so none were going to be available for a Semovente.
The commonplace CV3 hull was in plentiful supply but was too small. The work on putting a 65mm on a machine that size had already shown that. The best option therefore was the new projected 6 or 7 tonne medium tank which was just entering production itself. This new vehicle was ideal, small and light enough to be easily transported on the back of trucks but large and rugged enough to deal with the weight of the gun, ammunition and the necessary crew to serve it.
The decision by Pariani confirmed the 75mm gun as the choice for infantry support and the M6 was the vehicle to carry it. He had other plans for the M6 including as a platform for an anti-aircraft vehicle but concerned about air defence was requesting all new vehicles to come with some protection from the air.
It was not until a letter from a delegation of industry to General Pariani on the 30th of October 1939 though that a final decision as to which 75mm gun was going to be used. The gun selected was a 75mm L/18 and, as an aside, it was also mentioned that the 20mm cannon selected for the ‘tank’ version of the M6 was also suitable for use in an anti-aircraft role as well as an anti-tank role.
The vehicle which was to serve as the hull for the Semovente M6. This is the production L6/40 light tank. Source: Public Domain
Front view of the Semovente M6
Illustration on the Semovente M6 by Yuvnashva Sharma, funded by our Patreon campaign.
Modifications
The M6 was reclassified as a light tank L6 in 1940 (as the new M13/40 design was available for the medium tank role) and was a very mobile vehicle with the transmission at the front. A large hatch openable for the inspection and maintenance of the transmission and brakes was retained on the glacis as was the whole rear of the hull, allowing access to the engine and suspension components. The difference between the two came in the body of the vehicle at roughly track level. In place of the M6’s squarish body and vertical driver’s plate with a small turret on top (for a 20mm cannon or 37mm gun) was a large open-topped, open-backed rotating turret with the large 75mm gun mounted prominently in the center, although it is not known exactly how far this turret could rotate. A large order for 583 examples of the L6 was placed in March 1940 and this seems to have killed off the Semovente M6 project. Ansaldo and FIAT had won a large order and production would focus on that vehicle for the time being. A new Semovente on the hull of the L6 would appear shortly afterward but, for the time, the turreted M6 idea was over.
From approximately the same angle the modifications to the M6 are apparent.
Automotive
Like the M6 (L6/40) from which it was made, the Semovente M6 used two pairs of bogies on each side of the hull attached to torsion bars. The track was supported on the return run by two small rollers. Drive was from the front and the rear wheel was in contact with the ground. Power came from the same SPA model 18 68-70hp petrol engine as on the early L6 light tank although the L6 had not yet been formally standardized. This engine allowed the L6 to reach 25km/h off road and up to 42 km/h on road.
Semovente M6 with 75mm gun turret turned to the left showing a single crew position (driver) through the front of the turret presumably where a large hatch would go in a production version.
Crew
The previous Semovente version based on the CV3 had two crew, and the L6 light tank on which the Semovente M6 was based also had two crew members. It is therefore highly likely that this vehicle continued the trend. The Semovente da 47/32, also based on the L6, which later was approved, operated the much smaller 47mm gun, had a crew of three and was very cramped. This adds to the evidence that there was very little room inside the Semovente M6, especially considering the size of the 75mm shells it would have to carry.
Semovente M6 mockup showing the elevation of the 75mm gun in the turret.
Armament
The only gun known to have been planned for this vehicle is of 75mm calibre. A caliber which Italy had in no short supply. The gun selected was the Anslado 75mm L/18 gun, as this was already in production at the time by the makers of the designers of the vehicle. The gun would see use in later Semovente too. The 75mm L/18 was a howitzer standardized in 1934 and was actually just under 21 calibers long (20.75) despite being an ‘L/18’ thanks to an older Italian convention regarding how to measure the length of a barrel. It could fire a 6.4 kilogram shell out to nearly 10 km. Although the elevation and depression figures for this gun are not known when fitted to the M6 it did have a range of elevation from -10 to +45 when mounted normally as a field gun and the available photograph of it elevated would indicate 45 degrees was still probable. Various ammunition was available weighing between 4.5kg up to just over 8kg depending on ammunition type. Available ammunition for the 75mm gun at the time included several models of High Explosive shell, Armor Piercing (AP), Armour Piercing High Explosive, and the Effetto Pronto (EP) shaped charge round.
Conclusion
The Semovente M6 was a very good attempt by Italy pre-World War Two to field a large calibre gun onto a tracked chassis to support the infantry in the attack. It is not clear why this project was not adopted as the L6/40 was produced in large numbers, but the most likely explanations are that by this time the Carro Medio hull was already coming into production for the M11/39 and later the M13 series. This chassis was bigger, stronger and more adaptable so would be a better choice for a large-caliber Semovente than the L6. Within just a few months after the termination of this turretted M6 project, a new Semovente mounting the 47mm gun using the same L6 chassis began.
Semovente M6 specifications |
|
| Weight | 7 tonnes |
| Propulsion | likely SPA model 18 68- 70 hp petrol |
| Speed | est. 25km/h off road / 42km/h on road |
| Armament | 75mm L/18 and 8mm anti-aircraft machine gun |
| Armor | est. 6 to 30mm |
| Production | Mockup only |
Sources
Curami, L., Ceva, A. (1994). La Meccanizzazione dal Regio Esercito. Arte Della Stampa
Pignato, N., Cappellano, F. (2002) Gli autoveicoli da combattimento dell’Esercito Italiano. Stato Maggiore dell’Esercito
