Categories
South African SPAAG

Bosvark SPAAG

South Africa (1991)
Self-Propelled Anti-Aircraft Gun – ~36 Built

“Bosvark” The African Bushpig

The Bosvark takes its Afrikaans name from the African Bushpig, which is armed with an impressive set of tusks for digging up roots and to protect itself against predators. Similar to its namesake, the Bosvark self-propelled anti-aircraft gun (SPAAG) evolved to adapt to the harsh Southern African environment.

Bosvark SPAAG on parade during the Armed Forces Day 2019, Cape Town. Source J van Zyl

Development

During the South African Border War (1966-1989), the South African Defence Force (SADF) captured large quantities of ZU-23-2 towed anti-aircraft defence gun systems from the Popular Movement for the Liberation of Angola (MPLA). The MPLA had acquired these from their Cuban and Soviet benefactors. These weapons were used by the SADF in a variety of roles, including ground defence of bases, makeshift weapons platforms, and training. With the conclusion of the war, those not used for training were sent for preservation and storage.

Field conversion of a SAMIL-100 Kwêvoël Mk.2A single cab, converted to carry a captured ZU-23-2. Ogongo 1988. (E. Kotze)

 

A captured ZU-23-2 mounted on a tower platform for base defence. (A. Botha)

During early 1990, the Armaments Corporation of South Africa (ARMSCOR) launched a call based on end-user requirements set by the South African Defence Force (SADF) for proposals to mount the captured ZU-23-2 (designated GA-6 in the SANDF) on a vehicle. The primary development requirements stated that the vehicle had to be mine-resistant and be able to mount the ZU-23-2. The South African Military (SAMIL) -100 Kwêvoël cargo vehicle fulfilled the requirements with its armored crew compartment, mine-protected chassis, and spacious rear deck to mount the ZU-23-2. Nick Conradi a young engineer at Megkon Inc. came up with the concept that led to the project contract being assigned to them.  Nick Contadi was entrusted with the design and engineering work.

 

модель.jpg
Right rear view of the wooden model. Nick Conradi. With permission, Levan Pozvonkyan

 

модель1.jpg
Full rear view of the wooden model. Nick Conradi. With permission, Levan Pozvonkyan

 

3D модель.jpg
Computer model of the Bosvark. With permission, Levan Pozvonkyan

 

модель 1к1.jpg
Bosvark prototype April 1991. With permission, Levan Pozvonkyan

The first prototype was completed in early April 1991 with testing of the running gear done at Gerotech testing grounds in Pretoria.

 

испытание Геротек.jpg
Frontal view of Bosvark prototype, running gear testing. With permission, Levan Pozvonkyan
Испытания Геротек1.jpg
Rearview of Bosvark prototype, running gear testing. With permission, Levan Pozvonkyan

All tests were successfully completed by June 1991. ARMSCOR recommended that the Bosvark be mass-produced and full-scale production followed at the end of 1991 with 36 vehicles eventually built. Surprisingly, the Bosvark was not primarily born out of the need for a SPAAG, but rather a vehicle that could mount the ZU-23-2 (designated GA-6 in the SANDF) and be used in the ground role. Its predecessor, the Ystervark, was withdrawn from service in 1991 and decommissioned in 1997, making the Bosvark’s entry into service critical. South Africa is the only operator of the Bosvark SPAAG, which is used by the 10 Air Defence Artillery Regiment in Kimberley, the capital of Northern Cape province. At the time of writing, there are no published plans to replace the Bosvark.

 

Bosvark firing with “horizon” outriggers deployed to provide stability while firing. Source SADF

Design featuresThe Bosvark is a three-axle, 6 x 6 all wheel drive SPAAG based on the robust SAMIL-100 Kwêvoël mine-protected chassis. The chassis is V-shaped to deflect mine blasts from under the hull, away from the crew cabin, in order to maximise its crews’ chances of survival. This is achieved through several key design elements, which include high ground clearance, the V-shaped underbelly, and a purpose-built strengthened upper design which reduces the risk of shattered or buckled hull plates that could become debris. Most parts can be obtained commercially, which makes the Bosvark’s logistical train shorter and specialised maintenance support in the field unnecessary. The ability to interchange parts with other SAMIL-100 Kwêvoël vehicles simplifies and makes field repairs easier. Unlike its predecessor the Ystervark, the Bosvark crew are all located inside the crew cabin while travelling, which makes them less vulnerable to small arms fire and artillery fragments. 

Mobility

The Bosvark is based on a three-axle 6 x 6 all-wheel drive chassis and the wheels are 14×20 in size. The engine is a type FIOL 413F V10 air-cooled 4-stroke Deutz diesel with direct injection, which produces 315 hp at 2,500 rpm and 1,020 Nm of torque at 2,500 rpm. This effectively provides 16.15 hp/t, which is more than adequate for its role as a SPAAG operating behind the forward elements. Power is transmitted via a single dry plate clutch with per assisted hydraulic mechanism to the ZF 56-65 synchromesh manual gearbox, with a gear selection range of six-speed (6F and 1R). The drive travels through a transfer box, which provides both high and low range gear selection for on and off-road use.

The vehicle’s recommended safe travelling road speed is 100 km/h (62 mph) and 40 km/h (25 mph) cross-country (terrain dependent). It can ford 1.2 m (4 ft) of water without preparation and can cross a 0.5 m (19.7 in) ditch at a crawl. The driver’s task is made easier by a power steering system, while acceleration and braking are done via foot pedals. The vehicle makes use of a Withings suspension and has 380 mm (15 in) of ground clearance.

Endurance and logistics

To facilitate strategic mobility, the Bosvark has two 200 litre diesel fuel tanks on the right-hand side of the lower hull, which gives it an effective road range of 600 km (373 mi), 350 km (218 mi) cross-country, and 175 km (108 mi) over-sand. The vehicle is also fitted with a 200 l (53 gals) water tank underneath the armored crew compartment. The crew can access the water via a tap located above the front left wheel.

The Bosvark is equipped with two radios for tactical communication, which enables the crew to communicate effectively with command and control. For seamless communication between the crew compartment and the weapons deck, a portable radio is used.

Vehicle layout

The Bosvark can be divided into three parts: the chassis; armored crew cabin at the front; and the weapons deck at the rear, where the main armament is mounted. The engine is located at the front of the vehicle, with the raised armored crew cabin behind it, the length of which is built on a V-shaped hull. The engine features a trapezoidal ventilation grid at the front of the hood and beneath it is a forward-facing V-shaped bumper to assist in bundu bashing (driving through dense vegetation).  The armored crew cabin is rectangular in shape, with two forward-facing rectangular bullet-resistant windows. On either side of the cabin are two entry and exit armored doors with a rectangular bullet-resistant window each. The roof is armored and protects against medium artillery fragments. This setup provides all-around protection against small arms fire and the V-shaped hull protects the crew from mine blast underneath the hull.  Access to either side of crew cabin doors is via steel-framed ladders.

The crew’s seating is blast resistant and designed to protect the spine in case of a mine detonation under the vehicle. The driver station is located on the forward right side of the cabin, with the vehicle’s commander seated on the forward left. Behind them are three seats with the remaining crew. The vehicle’s commander is responsible for communication via the command system. The driver station has a range of mobility options, depending on terrain type, controllable through a panel to his front left.

For ease of access to the weapons deck, a removable solid steel stepladder is placed on the left side of the vehicle, between the armored crew cabin and weapons deck. The weapons deck consists of the floor on which the main armament is mounted. On either side of the weapon deck are two downwards folding side plates which are kept in an upright position when travelling. When stationary, these side plates are manually lowered to a horizontal position, which increases the available floor space on which magazines are placed.

To the front right of the weapons deck is a large armored storage box, where the magazines are kept. To the rear of the weapons deck is a large metal bin in which extra barrels and related gear are stored.

Protection

The armored crew cabin structure is made of RB 390 armored steel, which is 10 mm (0.4 in) thick and offers protection against 7.62×39 mm AP fire. The roof is 6 mm (0.24 in) thick and rated against 155 mm medium artillery fragmentation. The crew cabin doors are 6 mm (0.24 in) thick. The vehicle windows are made of armored glass which is 40 mm (1.57 in) thick and offers the same protection rating as the cabin structure. The V-shaped hull has been tested and proven against 3 x TM-57 landmine or equivalent of 21 kg of TNT under the crew cabin. The weapons deck is exposed.

Firepower

The Bosvark’s main armament is a gas-operated ZU-23-2 anti-aircraft gun system fitted to the weapons deck on three legs. It comprises two 23 mm barrels set side by side, each having an integrated ammunition box in which a single feed 50 round magazine feeds the barrels via conveyor belt.

ZU-23-2 anti-aircraft gun firing. Source unknown

 

Bosvarks ZU-23-2 anti-aircraft gun firing during the Armed Forces Day Demo 2018 at De Brug. Source J. du Plessis

The rate of fire is between 800 – 1,000 rpm per barrel, which translates into three one-second bursts before reload for each barrel is required. Due to the heat generated by firing, the barrels need to be changed for cooling after every six bursts. Practically, this means that, with the required reload and barrel changes, the gun can fire 200 rpm.The gun is operated manually and elevation is achieved with a handwheel and traverse with pumping pedals, which makes it somewhat limited in engaging fast-moving targets. Although the gun can elevate between -10º to +90º and can traverse 360º, its firing arc on the weapons deck is limited to -7º to +85º. With the armored crew cabin and magazine storage bins, the weapons full range of elevation and traverse is limited to the sides and rear of the vehicle.

Available ammunition includes APC-T and HEI. The HEI and APC-T ammunition weighs 445 g and has a muzzle velocity of 975 m/s. The ammunition has an effective range of 2,500 m against air targets and 2,000 m on ground targets. The APC-T can penetrate 50 mm of armored steel at 0º at 100 m.

Some 600 rounds of ammunition are carried in 12 portable magazines. When the vehicle stops to engage, the magazines are removed from their storage bin and placed on the deployed side panels for easier access. The Bosvark primarily relies on resupply from a SAMIL Kwêvoël 100 ammunition vehicle for sustained combat operations.

For close-in protection, a 7.62 mm SS-77 General Purpose Machine Gun (GPMG) can be mounted on the roof of the crew cabin.

Fire Control System

The ZU-23-2 is equipped with the ZAP-23 anti-aircraft automatic sight. The sight consists of two optics, namely the straight tube 2Ts 27 telescope and the 1 OM 8 optical sight. The former is used to acquire ground targets while the latter is used to accurately engage targets in the air. The 1 OM 8 optical sight has an x3.5 magnification and 4°30′ field of view.

ZAP-23 anti-aircraft automatic sight. Source Opticoel.com

Conclusion

The Bosvark offers a cost-effective SPAAG which is built according to the same fundamental principles as other wheeled South African military vehicles, which place emphasis on long-range, speed, mobility, flexibility, and simple logistics. Although not used in anger yet, the Bosvark is well placed as a SPAAG for mobile warfare in a low threat environment where potential enemies mainly rely on soft-skinned and lightly armored vehicles and do not have what can be considered as a modern air force.  

SOURCES

Camp, S. & Heitman, H.R. 2014. Surviving the ride: A pictorial history of South African manufactured mine protected vehicles. Pinetown, South Africa: 30° South Publishers.

Pozvonkyan, L. 2019. Anti-aircraft Bosvark. https://naperekorich.livejournal.com/12041.html?fbclid=IwAR2NDmjzNdXVaixC7eK4xUKLZ5nPCUl9RIyGHja-V1P-ciVGGkCpMF929KM

OPTICOEL. 2022. Anti-Aircraft Automatic Sight ZAP 23. https://www.opticoel.com/products/anti-aircraft-automatic-sight-zap-23/

Bosvark SPAAG Specifications

Dimensions (hull) (l-w-h) 11 m (36 ft. 1 in)– 2.5 m (8 ft. 2.4 in) – 3.4 m (11 ft. 2 in)
Total weight, battle-ready 19.5 tonnes
Crew + mounted infantry 5
Propulsion Type FIOL  413 V10 air-cooled 4-stroke Deutz diesel with direct injection which produces 268 hp at 2650 rpm (13.7 hp/t)
Suspension Withings suspension
Top speed road / off-road 100 km/h (62 mph)  / 40 km/h (25 mph)
Range road/ off-road 600 km (373 mi) / 300 km (186 mi) / 150 km ( 93 mi)
Armament 2 x 23 mm
1 × 7.62 mm SS-77
Armor Small arms 7.62 mm
Medium artillery fragments
Three x TM-57 landmine or equivalent of 21 kg of TNT under the crew cabin

Special thanks

The author would like to extend a special thanks to Levan Pozvonkyan who graciously offered his assistance with the research he has done on the Bosvark.

Video

Bosvark firing at time index 04:39

BOSVARK SPAAG

Bosvark SPAAG left side profile
Bosvark SPAAG right side profile

Illustration by Tank Encyclopedia’s own David Bocquelet.

 


South African Armoured Fighting Vehicles

South African Armoured Fighting Vehicles: A History of Innovation and Excellence, ([email protected])

By Dewald Venter

During the Cold War, Africa became a prime location for proxy wars between the East and the West. Against the backdrop of a steep rise in liberation movements backed by Eastern Bloc communist countries such as Cuba and the Soviet Union, southern Africa saw one of the most intense wars ever fought on the continent.

Subjected to international sanctions due to its policies of racial segregation, known as Apartheid, South Africa was cut off from sources of major arms systems from 1977. Over the following years, the country became involved in the war in Angola, which gradually grew in ferocity and converted into a conventional war. With the available equipment being ill-suited to the local, hot, dry and dusty climate, and confronted with the omnipresent threat of land mines, the South Africans began researching and developing their own, often groundbreaking and innovative weapon systems.

The results were designs for some of the most robust armored vehicles produced anywhere in the world for their time, and highly influential for further development in multiple fields ever since. Decades later, the lineage of some of the vehicles in question can still be seen on many of battlefields around the world, especially those riddled by land mines and so-called improvised explosive devices.

South African Armoured Fighting Vehicles takes an in-depth look at 13 iconic South African armored vehicles. The development of each vehicle is rolled out in the form of a breakdown of their main features, layout and design, equipment, capabilities, variants and service experiences. Illustrated by over 100 authentic photographs and more than two dozen custom-drawn color profiles, this volume provides an exclusive and indispensable source of reference.
Buy this book on Amazon!

Categories
South African SPAAG

Ystervark SPAAG

South Africa (1984)
Self-Propelled Anti-Aircraft Gun – ~70 Built

“Ystervark” The African Porcupine

The Ystervark takes its Afrikaans name from the South African or ‘Cape’ porcupine. The world’s largest porcupines and an animal with a strong body and protected by an impressive array of spines to defend itself against predators a vehicle named for this animal should embody those characteristics. The Ystervark self-propelled anti-aircraft gun (SPAAG) is exactly that, a sturdy and robust vehicle evolved to suit the harsh Southern African environment.

Ystervark troop, live-fire training somewhere in South West Africa (year unknown). Source: 10 Anti-Aircraft Regiment, Youngsfield Facebook group

Development

In 1983/84, the South African Defence Force (SADF) Anti-Aircraft Regiments had to tow their anti-aircraft artillery which consisted mainly of GAI-CO1 20 mm AA guns. With the SADFs transition to mobile warfare, towing was no longer suitable. The first mobile anti-aircraft vehicle incarnation came into being in 1983/84 as the brainchild of Johan Craft. It consisted of a Mercedes Benz gun tractor on which three wooden railway sleepers fitted with bolts and blue wire to mount the gas-operated GAI-CO1 20 mm anti-aircraft gun. From these testbeds, the vehicle operational requirement was developed and tested, and requirements for further development were given to Armaments Corporation of South Africa (ARMSCOR), which included the need for a mine-resistant chassis. The latter testbeds were relegated to a training role.

Mercedes Benz gun tractor fitted with the GAI-CO1 20 mm AA gun on the back while shooting at Toothrock. Source: 10 Anti-Aircraft Regiment, Youngsfield Facebook group

In 1981, before the need for a mine-resistant light anti-aircraft capability had been decided, Project Sireb had been launched. This project produced three mine-resistant vehicles as possible replacements for the Buffel APC. These prototypes were based on the SAMIL 20 chassis and were fitted with a full-length mine-protected hull which had a much higher and beefier suspension than the basic SAMIL 20 truck, leading to better cross-country performance. Unfortunately, none of the prototypes was found to be significantly better than the Buffel and further work was needed. However, one of the prototypes, known as the ‘Bulldog’, was adopted by the SAAF as an APC for use in airfield patrols. The Bulldog would form the basis on which the Ystervark would be built, by removing the passenger tub and replacing it with a weapons deck.

The Ystervark was developed from the requirements for a mobile self-propelled and mine-protected vehicle to provide a light anti-aircraft capability and which could accompany South African mechanized battalions on combat operations. The Ystervark was also employed to protect strategic assets, such as air bases in South-West Africa (SWA).

During Operation Thunder Chariot (1984), which was a division-sized exercise in South Africa, four Ystervarks were used operationally for the first time for evaluation.

The Ystervark’s first combat use was as part of 32 Battalion (32Bn) in 1986. Its continued presence with SADF mechanized battalions during Operations Modular, Hooper, and Excite in Angola provided a sufficient deterrent against Angolan and Cuban piloted MiGs, who seldom flew very low and preferred to remain at high altitudes.

On 8th October 1987, one of two MiG 23 aircraft bombing the 61 Mechanized Battalion Group (Meg Bn) laager with 500 kg bombs was shot down by 32Bn Ystervark when it pulled up at its end bombing run.

On 17th March 1988, Cuban pilot Ernesto Chavez, flying a MiG 23, was shot down and killed by a Ystervark while flying over Cuito Cuanavale.

The SADF deployed the Ystervark with the permanent forces at 101 Battery and 10 Anti-Aircraft Regiment. With the conclusion of the Border War, the Ystervark was phased out in 1991 and replaced with the SAMIL 100 Kwêvoël mine-protected SPAA truck called the Bosvark. This was armed with a twin 23 mm gun. The Ystervark was officially withdrawn from service in 1997.

It is unclear how many Ystervarks were produced although, it is estimated that at least 70. The Ystervark was only employed by the SADF.

Design features

The Ystervark was designed to maximize its crews` chances of survival when a mine was detonated anywhere under the hull. This was achieved through several key design elements, which included high ground clearance, a V-shaped underbelly, and a purpose-built strengthened upper design which reduced the risk of shattered or buckled hull plates that could become debris.

The African terrain, which in and of itself can inflict severe punishment on a vehicle, necessitates a robust design. The Ystervark’s design and simplicity made field repairs post-mine detonation possible, although very costly. A chassis-based MPV does not provide the same protection to the vehicle driveline when compared to modern monocoque hull design vehicles. Most parts could be obtained commercially, which made the Ystervarks logistical train shorter and specialized maintenance support in the field unnecessary

Mobility

The SAMIL 20 chassis was designed for difficult off-road applications in Africa. The suspension consisted of single leaf springs on the front axle and double coil springs on the rear axle. The Ystervark had a ground clearance of 460 mm (18.1 in) and could ford 1.2 m (3.9 ft) of water. The Type F6L 913 air-cooled 4 stroke Deutz6 cylinder with direct injection engine produced 124 hp (20.4 hp/t) at 2,650 rpm and was coupled to a five-speed (four forward and one reverse) synchromesh manual transmission consisting of a two-shaft z-65 drive via a transfer case with pneumatically lockable planetary differential gear. The vehicle had permanent 4 × 4 wheel drive. The four wheels were 14.50×20 in size. The Ystervark could cross a 0.85 m (33 in.) ditch at a crawl. The front and rear axle consisted of a portal driving axle with a pneumatically lockable differential with a portal spur gear set.

Endurance and logistics

The Ystervark had a 200 l (52.8 US gal.) fuel tank which granted it an operational range of 950 km (590 mi.) on-road and 475 km (295 mi.) off-road. Its maximum road speed was 90 km/h (55 mph) and 30 km/h (19 mph) off-road. A modular design allowed for easier maintenance and reduced logistical requirements. Additionally, the domestic production of components made replacement easy and lowered the cost for parts. A 100 l (26.4 US gal.) freshwater tank was located inside the V-shaped hull for the crew and was accessible via a tap located at the rear left of the lower vehicle’s V-shape.

Vehicle layout

The Ystervark consisted of three main parts: chassis, armored driver’s cab at the front right of the vehicle, and the weapons deck at the center rear, where the main armament was mounted. The engine was located at the center front of the vehicle and the transmission in-between the engine and the armored driver’s cab. The engine and transmission placement facilitated easy replacement in the event of damage due to a mine detonation.

One of the first Ystervark SPAAGs taking part in exercise Thunder Chariot 1984. Source: F. Marais

The driver’s cab was surrounded by three rectangular bulletproof glass windows and had an unarmored high-density polyethylene roof cover. The base was wedge-shaped and secured to the chassis. A single door was installed on the right side of the driver’s cab, as well as two steel steps for ease of entrance. The gear selector stick was located on the driver’s left-hand side, and a spare wheel was kept to the left of the driver’s cab. The crew seating was blast-resistant and designed to protect the spine in case of a mine detonation under the vehicle.

Access to the weapons deck was gained via two incremental pairs of steel steps on either side, above the rear wheels. The weapon deck seating consisted of two seats in between the driver’s cab and weapons deck, each facing towards the rear of the vehicle. The crew commander sat on the seat directly behind the driver’s cab to facilitate communication with the driver through an opening at the rear of the driver’s cab. The gunner sat on the right-hand seat of the weapons deck. Both seats were equipped with harnesses to secure the crew in case of a mine detonation or accidental rollover. The middle of the left and right sides of the weapons deck contained horizontal hinged panels which could be opened outward via quick release when the main armament was to be used. The left and right panels could fold down all the way, while the middle-left panel only dropped down 45 degrees. While crossing uneven terrain at speed, the panels were secured in their upright position.

On the rear of the weapons, the deck was a sizable storage box manufactured from high-density polyethylene. The front lower part of the storage box was used by the passengers to store the spare kit, while the top part was for the driver’s use. At the rear of the V-shape was a water tap that was connected to a 100 l (26.4 US gal.) freshwater tank located within the V-shape. For tactical communication, an A-53 (UHF) man-portable radio set was kept at the front of the weapons deck, between the commander and gunner seats.

Protection

The Ystervark could protect its crew against a single TM-57 anti-tank mine blast under the hull, which was equivalent to 6.34 kg (14 lb.) of TNT, or a double TM-57 anti-tank mine blast under any wheel. Its V-shaped bottom armored hull design deflected blast energy and fragments away from the driver and weapons deck. Plastic fuel and freshwater tanks were located within the V-shaped hull of the weapons deck. These tanks would help absorb explosive blast energy from a mine detonation.

The driver’s cab windows were all bulletproof. The armored driver’s cab and weapons deck side panels were at least 7 mm (0.27 in) thick, offering protection against common small arms fire in the Angolan theatre. These included 7.62 mm NATO and 7.62 mm AK-47 Ball ammunition, as well as explosive fragments. However, the rear of the weapons deck, as well as the top, were exposed.

Ystervark on public display at the Pretoria Show 1991. The differences compared to the Buffel (below) are evident when comparing the driver’s cab location. Source: J. Botha

 

Buffel APC. Source: P. Wiese

Firepower

The Ystervark`s main armament weighing in at  512 kg was a gas-operated GAI-CO1 20 mm anti-aircraft gun fitted to the weapons deck on three legs, two facing backward and one to the front. The GAI-C01 made use of a KAD-B13-3 cannon which fired from a single feed 75-round magazine from the right-hand side. The rate of fire was 550 rounds/min, which translated into nine one-second bursts before reloading was required. Available ammunition included APHE, HE, and tracer. The HE ammunition weighed 125 g and had a muzzle velocity of 1100 m/s, while the AP, weighing 110 g, had a muzzle velocity of 1050 m/s. The ammunition had an effective range of 2,000 m and the APHE could penetrate 15 mm of RHA at zero degrees at 800 m. The ammunition performance was more than adequate against low-flying aircraft, helicopters, and soft and lightly armored vehicles. A typical ammunition belt consisted of five or seven rounds of HE followed by an APHE one.

62 Mechanised Battalion Group Ystervark night shoot in Oshakati 1989. Source P. van Heerden

The elevation was achieved with a handwheel and traverse with pumping pedals, making it somewhat limited in engaging fast-moving targets. The gun could elevate between -7 to +83 degrees and could traverse 360 degrees. The full range of elevation was, however, limited to some 270 degrees, as the driver’s cab is in the way.

Ammunition storage was limited to three bins located on the floor of the weapons deck, each of which housed two 75 round magazines (450 rounds total). During operations, this was increased to nine 75 round magazines (675 rounds total). The Ystervark primarily relied on resupply from a Kwêvoël-100 ammunition vehicle for sustained combat operations.

Fire Control System

The mount traditionally included an x1 sight for antiaircraft use and an x3.7 sight for ground targets. The Ystervark’s main armament was fitted with a Delta IV reflector sight which could be set for targets with speeds between 200 km/h and 900 km/h and could be illuminated at night.

GAI-CO1 20 mm anti-aircraft gun fitted a Delta IV reflector sight. Source 10 Anti-Aircraft Regiment, Youngsfield Facebook group

Operational Use

In 1986, the director of Air Defence Artillery decided to decentralize the Ystervark deployment. This consisted of troop-sized units of six vehicles with command and logistic vehicles assigned to mechanized battalions such as 32, 61, and 62.

Ystervark troop assigned to 61 Mechanised Battalion Group, 1987/88, Angola. Source 10 Anti-Aircraft Regiment, Youngsfield Facebook group
Ystervark troop with Kwêvoël-100 ammunition support vehicles assigned to 61 Mech. Foxtrot Bty at Ondangwa, 1988. Source: Robert Dixon

Operational Doctrine

“In Sept 1986, the Officer Commanding of 61 Meg Bn Gp, Kmdt K. Smith tasked the Foxtrot Bty Cmdr, Capt Deon Bornman to as a matter of priority formulate and practice the operational and tactical doctrine for the  Ystervark to integrate and operate within in Mechanized Columns. The initial ideas were soundly based on the 61 Meg Bn Gp SOP. The concept of movement and manoeuvring with the mechanised forces was tested successfully in exercises that year. This became the new norm of Mobile AA  in 1987. The era of AA protecting Echelon’s and static targets ended! This then became the standard operating procedure (SOP) for applying the Ystervark with mechanised units. The doctrine was introduced to the AA School and 101 Bty, 10 AA Regiment in 1989 and the official AA Battle Handling doctrine was updated.

The Ystervark units moved along with their assigned mechanised battalions, either one tactical jump (100-200 m) behind the A Echelon or on the flanks of the force. As per enemy appreciations and the typical formations of own attacking forces, it was envisaged that an enemy air attacked will definitely come from the flank. The Ystervark could not practice fire and movement, as their main armament faced backwards and needed to be stationary to fire. This was a limitation but not a deterrent for operational deployment. Typical target protection was advancing columns and the protection of vital assets, such as headquarters, laagers and harbours, artillery, supplies or medical vehicles. The main advantage of the vehicle that it was in 100% of cases in operations ready to move and/or redeploy with 10 minutes that made the system adaptable and efficient as a deterrent.

Only on one occasion, in September 1987, was the Ystervark used in a conventional role during the ‘advance to contact’  with 61 Mech, when they due to the lack of enemy aircraft successfully attacked People’s Armed Forces of Liberation of Angola (FAPLA) 47 Brigade ground forces. The Ystervark effectively engaged the visible vehicles, soft targets and infantry while protecting the flanks of the mechanized force.”

Former Foxtrot Bty Cmdr, Capt D. Bornman

Ystervark crew from 32 Battalion with the external 800-liter fuel drop tank of a MiG-23ML which they shot down in 1987. Source: L. Scheepers

A lack of armor protection necessitated extreme proficiency with camouflage as a passive defense. The Ystervark’s success lay in its presence as a deterrent, which resulted in very few enemy MiG sorties at treetop level. Those that did venture low were engaged.

Conclusion

When the SADF transitioned from motorized to mechanized warfare, it required a SPAAG that could keep up with its mechanized units. The Ystervark was a stopgap designed to fulfill that need. Concerning mobility, the Ystervark was able to keep up with the mechanized units to which it was assigned. The Ystervark’s main armament had two limitations. The first was the limited number of rounds per magazine and the second that require manual aiming which limited its use against fast-flying jet aircraft. These limitations were somewhat negated by operating the Ystervark in troops of six vehicles. Despite the limitations, the Ystervark posed a credible threat against enemy aircraft, forcing them to remain at high altitude before bombing ground targets, which resulted in extremely low success. If the SADF did not have the Ystervark, Cuban and Soviet air-to-ground attacks against SADF mechanized forces in Angola would most certainly have been much bolder. The Ystervark was the official combat vehicle for the Anti Aircraft formation training and exercises at 101 Bty, 10 AA Regt. It was withdrawn from front-line service in 1991 and formally decommissioned in 1997.

Ystervark SPAAG Specifications

Dimensions (hull) (l-w-h) 5.10 m – 2.05 m – 2.96 m (16.73 ft – 6.72 ft – 9.71 ft)
Total weight, battle-ready 7.7 Tons
Crew + mounted infantry 3
Propulsion Type F6L 913 air-cooled 4 stroke Deutz6 cylinder with direct injection engine produces 124 hp (20.4 hp/t) at 2650 rpm.
Suspension Single leaf spring on front axle wheels and double coil springs on rear axle
Top speed road / off-road 85 km/h (52 mph) / 30 km/h (19 mph)
Range road/ off-road 900 km (559 miles) / 450 km (280 miles)
Armament 1 x gas-operated GAI-CO1 20 mm anti-aircraft gun
Armor 6-7mm (all arcs)

Ystervark SPAAG

Ystervark SPAAG in ready position

 

Ystervark SPAAG in travel position

All Illustrations are by Tank Encyclopedia’s David Bocquelet.

Bibliography

  • Borman. D. 2020. Foxtrot Bty Cmdr: history and operational use. Telephone interview. 22 April 2020.
  • Blaauw, H. 2020. Former Ystervark operator: history and operational use. Telephone interview: 3 April 2020.
  • Camp, S. & Heitman, H.R. 2014. Surviving the ride: A pictorial history of South African manufactured mine-protected vehicles Pinetown: 30° South Publishers.
  • Heitman, H.R. 1988. Krygstuig van Suid-Afrika. Struik.
  • Klopper, W. 2020. Project Officer on the Development of the Ystervark: history and operational use. Telephone interview. 4 May 2020.
  • Slabbert, M. 2020. Former Ystervark operator: history and operational use. Telephone interview: 30 March 2020.
  • Van Heerden, P. 2020. Former Ystervark operator: history and operational use. Telephone interview. 3 April 2020.

South African Armoured Fighting Vehicles

South African Armoured Fighting Vehicles: A History of Innovation and Excellence, ([email protected])

By Dewald Venter

During the Cold War, Africa became a prime location for proxy wars between the East and the West. Against the backdrop of a steep rise in liberation movements backed by Eastern Bloc communist countries such as Cuba and the Soviet Union, southern Africa saw one of the most intense wars ever fought on the continent.

Subjected to international sanctions due to its policies of racial segregation, known as Apartheid, South Africa was cut off from sources of major arms systems from 1977. Over the following years, the country became involved in the war in Angola, which gradually grew in ferocity and converted into a conventional war. With the available equipment being ill-suited to the local, hot, dry and dusty climate, and confronted with the omnipresent threat of land mines, the South Africans began researching and developing their own, often groundbreaking and innovative weapon systems.

The results were designs for some of the most robust armored vehicles produced anywhere in the world for their time, and highly influential for further development in multiple fields ever since. Decades later, the lineage of some of the vehicles in question can still be seen on many of battlefields around the world, especially those riddled by land mines and so-called improvised explosive devices.

South African Armoured Fighting Vehicles takes an in-depth look at 13 iconic South African armored vehicles. The development of each vehicle is rolled out in the form of a breakdown of their main features, layout and design, equipment, capabilities, variants and service experiences. Illustrated by over 100 authentic photographs and more than two dozen custom-drawn color profiles, this volume provides an exclusive and indispensable source of reference.
Buy this book on Amazon!